Zamix BioWhite is a complete primer and finish in one, containing a special ingredient which protects its surface film from mould, mildew and bacteria, making it ideal for use in kitchens, bathrooms, medical facilities and food preparation areas.
- Interior or exterior
- White - tintable
- Excellent wet adhesion
- Quick drying
- Virtually odour free
- Can be sanded
- Old glossy paint
- Galvanised metal
- Non-ferrous metals
- Glazed block
¹ Not recommended for baths, sinks or showers where continuous water or hot water contact occurs.
You don't have to have a problem with mould, mildew or bacteria to use Zamix BioWhite; you should always use it in any area where there is a possibility of mould, mildew or bacteria, and that means on walls and ceilings in all kitchens and bathrooms.
- Coverage: 8-12m²/Ltr
- Drying time (re-coat): 45mins
- Cleanup: Water
(Click here for further info)
The surface must be clean and dry, free from all grease, wax, oil, polish, loose paint, dirt, rust or other contamination. Clean with a strong abrasive detergent, rinse well and allow to dry. Scrub mouldy or mildewed surfaces with bleach and rinse well.
When priming hard, flossy surfaces or metal, clean thoroughly and then wipe down the surface with cellulose thinners or xylene (do not use mineral spirits, turpentine solvents which may leave oily residues). For very hard glossy surfaces abrade with silicon carbide sanding may be necessary before applying Zamix BioWhite for the best adhesion.
Zamix BioWhite has a coverage of around 8½ m²/Ltr, but coverage will vary depending on the surface the product is applied to.
Drying time (to touch) is 30 to 45mins under standard conditions (25ºc and 50% relative humidity). It can be nib sanded or top-coated 3 hours after application and will generally become hard in 7-10 days.
Zamix BioWhite should be used in temperatures between 3ºc and 40ºc. PrimeBond Extra should not be used in temperatures lower than 10ºc.
© 2010 Paintz Ltd.